All Course Descriptions

IMM 1483 - Industrial Control Systems

Technical Hours: 3
IMM 1483 - Industrial Control Systems. Instruction in the operation and function of industrial control circuits and devices. Emphasis is placed on the student's ability to diagram, wire and troubleshoot a variety of circuits, control devices and actuators. Two hours lecture. Two hours laboratory. Three hours credit.

IMM 1514 - Equipment Installation & Alignment

Technical Hours: 4
IMM 1514 - Equipment Installation & Alignment. Instruction in pre-installation checks, assembly, location and layout of equipment, preparation of foundations and anchoring procedures, rigging and hoisting, and alignment and initial setup of equipment. Two hours lecture. Four hours laboratory. Four hours credit.

IMM 1614 - Principles of Piping & Hydro-Testing

Technical Hours: 4
IMM 1614 - Principles of Piping & Hydro-Testing. Instruction on basic principles of piping and pipe fitting, basic pipe fitting procedures, and basic hydro-testing of pipe systems. Two hours lecture. Four hours laboratory. Four hours credit.

IMM 1733 - Maintenance Welding & Metals

Technical Hours: 3
IMM 1733 - Maintenance Welding and Metals. Instruction in different metals and their properties, and in basic SMAW welding and oxy-fuel cutting and brazing. One hour lecture. Four hours laboratory. Three hours credit.

IMM 1813 - Industrial Electricity I

Technical Hours: 3
IMM 1813 – Industrial Electricity I. Instruction in terminology and basic principles of electricity, use of test equipment, safety practices for working around and with electricity, and basic electrical procedures. Two hours lecture. Two hours laboratory. Three hours credit.

IMM 1814 - Industrial Electricity I

Technical Hours: 4
IMM 1814 – Industrial Electricity I. Instruction in terminology and basic principles of electricity, use of test equipment, safety practices for working around and with electricity, and basic electrical procedures. Two hours lecture. Four hours laboratory. Four hours credit.

IMM 1823 - Industrial Electricity II

Technical Hours: 3
IMM 1823 – Industrial Electricity II. Advanced skills and knowledge associated with electrical systems in an industrial setting. Content includes instruction in the National Electrical Code, electrical circuits, motors, and estimating expenses for a given project. Two hours lecture. Two hours laboratory. Three hours credit.

IMM 1913 - Special Project in Industrial Maintenance Mechanics

Technical Hours: 3
IMM 1913 - Special Project in Industrial Maintenance Mechanics (Prerequisite: Consent of instructor). Practical applications of skills and knowledge gained in other Industrial Maintenance Mechanics courses. The instructor works closely with the student to insure that selection of a special project enhances the student's learning experiences. One hour lecture. Four hours laboratory. Three hours credit.

IMM 1921 - Supervised Work Experience in Industrial Maintenance Mechanics

Technical Hours: 1
IMM 1921 - Supervised Work Experience in Industrial Maintenance Mechanics (Consent of instructor). A course which is a cooperative program between industry and education and is designed to integrate the student's technical studies with industrial experience. Variable credit is awarded on the basis of one semester hour per 45 industrial contact hours. Three hours externship. One hour credit.

IMM 1922 - Supervised Work Experience in Industrial Maintenance Mechanics

Technical Hours: 2
IMM 1922 - Supervised Work Experience in Industrial Maintenance Mechanics (Consent of instructor). A course which is a cooperative program between industry and education and is designed to integrate the student's technical studies with industrial experience. Variable credit is awarded on the basis of one semester hour per 45 industrial contact hours. Six hours externship. Two hours credit.

IMM 1923 - Supervised Work Experience in Industrial Maintenance Mechanics

Technical Hours: 3
IMM 1923 - Supervised Work Experience in Industrial Maintenance Mechanics (Consent of instructor). A course which is a cooperative program between industry and education and is designed to integrate the student's technical studies with industrial experience. Variable credit is awarded on the basis of one semester hour per 45 industrial contact hours. Nine hours externship. Three hours credit.

IMM 1924 - Supervised Work Experience in Industrial Maintenance Mechanics

Technical Hours: 4
IMM 1924 - Supervised Work Experience in Industrial Maintenance Mechanics (Consent of instructor). A course which is a cooperative program between industry and education and is designed to integrate the student's technical studies with industrial experience. Variable credit is awarded on the basis of one semester hour per 45 industrial contact hours. Twelve hours externship. Four hours credit.

IMM 1925 - Supervised Work Experience in Industrial Maintenance Mechanics

Technical Hours: 5
IMM 1925 - Supervised Work Experience in Industrial Maintenance Mechanics (Consent of instructor). A course which is a cooperative program between industry and education and is designed to integrate the student's technical studies with industrial experience. Variable credit is awarded on the basis of one semester hour per 45 industrial contact hours. Fifteen hours externship. Five hours credit.

IMM 1926 - Supervised Work Experience in Industrial Maintenance Mechanics

Technical Hours: 6
IMM 1926 - Supervised Work Experience in Industrial Maintenance Mechanics (Consent of instructor). A course which is a cooperative program between industry and education and is designed to integrate the student's technical studies with industrial experience. Variable credit is awarded on the basis of one semester hour per 45 industrial contact hours. Eighteen hours externship. Six hours credit.

IMM 1933 - Manufacturing Skills

Technical Hours: 3
IMM 1933 - Manufacturing Skills. This course is designed to provide the student with the basic skills needed to be successful in a high-performance manufacturing environment. The course covers the following topics critical to employment; basic computer literacy, safety and CPR, blueprint reading, precision measurement, and an introduction to manufacturing improvement methods such as Lean Manufacturing, Quick Changeover, 5S, teamwork and problem solving. Three hours lecture. Three hours credit.

IMM 2113 - Equipment Maintenance, Troubleshooting, & Repair

Technical Hours: 3
IMM 2113 - Equipment Maintenance, Troubleshooting, & Repair. Maintenance and troubleshooting techniques, use of technical manuals and test equipment, and inspection/evaluation/repair of equipment. One hour lecture. Four hours laboratory. Three hours credit.

IMM 2123 - Power Tools, Machining, and Materials

Technical Hours: 3
This course is designed to provide fundamental skills associated with all mechanical maintenance courses. This course includes safety, powered hand and stationary tools, use of a calculator, test equipment familiarization and terminology. Two hours lecture. Two hours laboratory. Three hours credit.

IMM 2213 - Advanced Electrical Industrial Maintenance

Technical Hours: 3
IMM 2213 - Advanced Electrical Industrial Maintenance. This course includes hazardous locations, electronic components, E & I drawings, motor controls, distribution equipment, transformer applications, and conductor selection and calculation. Two hours lecture. Two hours laboratory. Three hours credit.

IMM 2223 - Advanced Mechanical Industrial Maintenance

Technical Hours: 3
IMM 2223 - Advanced Mechanical Industrial Maintenance. This course includes temporary grounding, layout and installation of tubing and piping systems, machine bending of conduit, hydraulic controls, pneumatic controls, and motor-operated valves. Two hours lecture. Two hours laboratory. Three hours credit.

IMM 2423 - Solid State Motor Control

Technical Hours: 3
IMM 2423 – Solid State Motor Control. This course includes principles and operation of solid state motor control. Additionally, the course includes the design, installation, and maintenance of different solid state devices for motor control. Two hours lecture. Two hours laboratory. Three hours credit.

IMM 2433 - Electronic Motion Control

Technical Hours: 3
IMM 2433 - Electronic Motion Control. This course explains applications and operating procedures of solid-state controls, reduced-voltage starters, and adjustable frequency drives as well as troubleshooting procedures. Two hours lecture. Two hours laboratory. Three hours credit.

IMM 2513 - PLC Multi-Platfrom

Technical Hours: 3
This course covers use of programmable logic controllers (PLCs) in modern industrial settings as well as the operating principles of PLCs and practice in the accelerated programming across multiple PLC platforms, installation and maintenance of PLCs. Two hours lecture. Two hours laboratory. Three hours credit.

IMM 2613 - Programmable Logic Controllers

Technical Hours: 3
IMM 2613 - Programmable Logic Controllers. This course includes of programmable logic controllers (PLCs) in modern industrial settings. This course also includes the operating principles of PLCs and practice in the programming, installation, and maintenance of PLCs. Two hours lecture. Two hours laboratory. Three hours credit.

IMM 2623 - Advanced Programmable Logic Controllers

Technical Hours: 3
IMM 2623 – Advanced Programmable Logic Controllers. Advanced PLC course that provides instruction in the various operations, installations, and maintenance of electric motor controls. Also, information in such areas as sequencer, program control, introduction to function blocks, sequential function chart, introduction to HMI, and logical and conversion instructions. Two hours lecture. Two hours laboratory. Three hours credit.

IST 1124 - IT Foundations

Technical Hours: 4
IST 1124 - IT Foundations. This course covers the diagnosis, troubleshooting, and maintenance of computer components and interpersonal communications for IT professionals. Topics include hardware compatibility, system architecture, memory, input devices, video displays, disk drives, modems, printers, safety and environmental issues, communication, and professional behavior. Two hours lecture. Four hours laboratory. Four hours credit.

IST 1134 - Fundamentals of Data Communications

Technical Hours: 4
IST 1134 - Fundamentals of Data Communications. This course presents basic concepts of telephony, local area networks, wide area networks, data transmission, and topology methods. Two hours lecture. Four hours laboratory. Four hours credit.

IST 1143 - Principles of Information Security

Technical Hours: 3
IST 1143 - Principles of Information Security. This course is an introduction to the various technical and administrative aspects of information security and assurance. This course provides the foundation for understanding the key issues associated with protecting information assets, determining the levels of protection and response to security incidents, and designing a consistent, reasonable information security system with appropriate intrusion detection and reporting features. Two hours lecture. Two hours laboratory. Three hours credit.

IST 1154 - Web & Programming Concepts

Technical Hours: 4
IST 1154 - Web and Programming Concepts. This course is an introduction to Web site development and programming logic. Students will gain hands-on experience in the development of computer programs. Upon completion of this course, students will be able to create a Web site and post it on the Internet. Two hours lecture. Four hours laboratory. Four hours credit.

IST 1163 - Database and SQL Concepts

Technical Hours: 3
IST 1163 - Database and SQL Concepts. This course is an introduction to the design and manipulation of relational databases. Emphasis is placed on creation, manipulation, extraction, and display of data from existing databases. QBE and SQL are explored. Two hours lecture. Two hours laboratory. Three hours credit.

IST 1183 - Essentials of Information Systems Technology

Technical Hours: 3
IST 1183 - Essentials of Information Systems Technology. This course covers the diagnosis, troubleshooting, and maintenance of computer components. Topics include hardware compatibility, system architecture, memory, input devices, video displays, disk drives, modems, and printers. Two hours lecture. Two hours laboratory. Three hours credit.

IST 1193 - Practical Applications in Information Systems Technology

Technical Hours: 3
IST 1193 - Practical Applications in Information Systems Technology. This course will provide experience with operating systems. Emphasis will be placed on support personnel interaction (communication and professional behavior) with the platform to assist users in business environments. Topics on safety and environmental issues are included. Two hours lecture. Two hours laboratory. Three hours credit.

IST 1213 - Client Installation & Configuration

Technical Hours: 3
IST 1213 - Client Installation and Configuration. This course is designed to help the student install, support, and troubleshoot a current client operating system. Emphasis will be placed on common user operations as well as the network administrator's support of the client. Two hours lecture. Two hours laboratory. Three hours credit.

IST 1223 - Network Components

Technical Hours: 3
IST 1223 - Network Components. (Prerequisite: IST 1134). This course presents local area network and wide area network connectivity. It focuses on architectures, topologies, protocols, and transport methods of a network. Two hours lecture. Two hours laboratory. Three hours credit.

IST 1244 - Network Admin Using Microsoft Windows Server

Technical Hours: 4
IST 1244 - Network Admin Using Microsoft Windows Server. This course focuses on the management of a computer network using the Microsoft Windows Server network operating system. Emphasis will be placed on daily administrative tasks performed by a network administrator. Two hours lecture. Four hours laboratory. Four hours credit.

IST 1254 - Network Administration Using Linux

Technical Hours: 4
IST 1254 - Network Administration Using Linux. This course focuses on the management of a computer network using the Linux operating system. Emphasis is placed on installation, configuration, implementation, and administrative tasks of a functional server. Two hours lecture. Four hours laboratory. Four hours credit.

IST 1263 - Microsoft Office Applications

Technical Hours: 3
IST 1263 - Microsoft Office Applications. This course will introduce an operating system and word processing, spreadsheet, database management, and presentation software application. Two hours lecture. Two hours laboratory. Three hours credit.

IST 1283 - Programming Principles with Swift

Technical Hours: 3
IST 1283 - Programming Principles with Swift. This course is designed to help students build a solid foundation in programming using Swift. Students get practical experience with the tools and techniques they will need to build basic iOS apps from scratch. Students will also learn problem-solving skills and develop their own ways of breaking down problems into manageable pieces. As they gain more practice as programmers, students will get better at designing clever and efficient solutions to coding challenges. Two hours lecture. Two hours laboratory. Three hours credit.

IST 1314 - Visual BASIC Programming Language

Technical Hours: 4
IST 1314 - Visual BASIC Programming Language. This introduction to the Visual BASIC programming language introduces the student to object-oriented programming and a graphical integrated development environment. Two hours lecture. Four hours laboratory. Four hours credit.

IST 1324 - RPG Programming Language

Technical Hours: 4
IST 1324 - RPG Programming Language. This course is designed to introduce the student to the RPG language and to use the computer in business applications. Two hours lecture. Four hours laboratory. Four hours credit.

IST 1334 - COBOL Programming Language

Technical Hours: 4
IST 1334 - COBOL Programming Language (Prerequisite: IST 1154 or Permission of Instructor). This course is designed to introduce the student to the use of the COBOL language in business applications to include arithmetic operations, report editing, control break processing, and table processing techniques. Two hours lecture. Four hours laboratory. Four hours credit.

IST 1433 - Web Development Using HTML & CSS

Technical Hours: 3
IST 1433 - Web Development Using HTML & CSS. This course involves the application of various professional and personal Web design techniques. Students will work with the latest WYS/WYG editors/HTML editors, animation/multimedia products, and photo editors. Two hours lecture. Two hours laboratory. Three hours credit.

IST 1454 - Principles of Mobile App Development

Technical Hours: 4
IST 1454 - Principles of Mobile App Development. This course is designed to help students build a solid foundation in programming fundamentals using Swift as a language. Students get practical experience with the tools, techniques, and concepts needed to build a basic iOS app from scratch. Students will also learn user interface design principles, which is fundamental to programming and making great apps. Three hours lecture. Two hours laboratory. Four hours credit.

IST 1513 - SQL Programming

Technical Hours: 3
IST 1513 - SQL Programming. This course is the first of a two-part series that offers students an extensive introduction to data server technology, covering the concepts of both relational and object relational databases and the Structured Query Language (SQL). Students are taught to store, retrieve, and manipulate data. Two hours lecture. Two hours laboratory. Three hours credit.

IST 1514 - SQL Programming

Technical Hours: 4
IST 1514 - SQL Programming. This course is the first of a two-part series that offers students an extensive introduction to data server technology, covering the concepts of both relational and object relational databases and the Structured Query Language (SQL). Students are taught to store, retrieve, and manipulate data. Three hours lecture. Two hours laboratory. Four hours credit.

IST 1523 - SQL Programming II

Technical Hours: 3
IST 1523 - SQL Programming II. This course is the second of a two-part series that offers students an extensive introduction to data server technology. Students are taught advanced concepts of both relational and object relational databases and the Structured Query Language (SQL). Students are taught to create and maintain database objects and control user access. Two hours lecture. Two hours laboratory. Three hours credit.

IST 1714 - Java Programming Language

Technical Hours: 4
IST 1714 - Java Programming Language. This introduction to the Java Programming Language is to include sort, loops, arrays, and applets. Two hours lecture. Four hours laboratory. Four hours credit.

IST 1723 - Programming in Python

Technical Hours: 3
IST 1723 - Programming in Python. This course is designed to provide an introduction to programming concepts and data informatics using Python through lecture and a series of practical hands-on exercises. Two hours lecture. Two hours laboratory. Three hours credit.

IST 2224 - Network Planning & Design

Technical Hours: 4
IST 2224 - Network Planning and Design (Prerequisite: IST 1223). This course involves applying network concepts in planning and designing a functioning network. Emphasis is placed on recognizing the need for a network, conducting an analysis, and designing a solution. Two hours lecture. Four hours laboratory. Four hours credit.

IST 2234 - Network Implementation

Technical Hours: 4
IST 2234 - Network Implementation (Prerequisite: IST 2224). This course is the culmination of all concepts learned in the network curriculum. Topics include planning, installation, evaluation, and maintenance of a network solution. Two hours lecture. Four hours laboratory. Four hours credit.

IST 2314 - Systems Analysis & Design

Technical Hours: 4
IST 2314 - Systems Analysis and Design. This course introduces techniques used in systems analysis and design. Emphasis will be placed on the design, development, and implementation of an information system. Two hours lecture. Four hours laboratory. Four hours credit.