Technical Course Descriptons

ENT 1533 - Blueprint Reading

Technical Hours: 3
ENT 1533 - Blueprint Reading. This course is designed to give the student terms and definitions used in reading blueprints. Basic sketching, drawing, and dimensioning of objects will be covered. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 1591 - Internship/Special Project in Design

Technical Hours: 1
ENT 1591 - Internship/Special Project in Design (Prerequisite: successful completion of the core technical courses). This course is designed for the student to use the skills and knowledge gained in other design courses. It is a cooperative program between industry and education designed to integrate the student's technical studies with industry experience. Variable credit is awarded on the basis of one credit hour per 45 industry contact hours. One hour credit.

ENT 1592 - Internship/Special Project in Design

Technical Hours: 2
ENT 1592 - Internship/Special Project in Design (Prerequisite: successful completion of the core technical courses). This course is designed for the student to use the skills and knowledge gained in other design courses. It is a cooperative program between industry and education designed to integrate the student's technical studies with industry experience. Variable credit is awarded on the basis of one credit hour per 45 industry contact hours. Two hours credit.

ENT 1593 - Internship/Special Project in Design

Technical Hours: 3
ENT 1593 - Internship/Special Project in Design (Prerequisite: successful completion of the core technical courses). This course is designed for the student to use the skills and knowledge gained in other design courses. It is a cooperative program between industry and education designed to integrate the student's technical studies with industry experience. Variable credit is awarded on the basis of one credit hour per 45 industry contact hours. Three hours credit.

ENT 1613 - Architectural Design I

Technical Hours: 3
ENT 1613 - Architectural Design I (Prerequisite: ENT 1313). This course is a study in development of architectural design principles for a residential structure. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 1713 - Fundamentals of Machine Processes

Technical Hours: 3
ENT 1713 - Fundamentals of Machine Processes. This course is designed to give the student basic machining equipment and safety procedures. Emphasis is placed on measurement techniques, machine technology, machine tools, and applications. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 1813 - Basic Electricity & Electronics

Technical Hours: 3
ENT 1813 – Basic Electricity & Electronics. This course is designed to give the student instruction in terminology and basic principles of electricity, use of test equipment, safety practices for working around and with electricity, and basic electrical procedures. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 1823 - Design for Manufacturing

Technical Hours: 3
ENT 1823 - Design for Manufacturing (Prerequisite: ENT 1113). This course is designed to offer instruction in various methods of manufacturing with emphasis on the drafter's role in manufacturing. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 1833 - Manufacturing Processess

Technical Hours: 3
ENT 1833 - Manufacturing Processes. This course is designed to give the student a study of modern manufacturing processes with an emphasis on flexible manufacturing and computer integrated manufacturing. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2133 - Professional Development

Technical Hours: 3
ENT 2133 - Professional Development (Prerequisite: DDT 1163 or ENT 1113). This course emphasizes an awareness of interpersonal skills essential for job success. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2153 - Civil Drafting

Technical Hours: 3
ENT 2153 - Civil Drafting (Prerequisite: DDT 1313 or ENG 1313). This course is designed to give the student an introduction to computer-aided design/drafting software for civil, surveying, and land development disciplines. Topics include mapping scales and symbols, civil fundamentals, location and direction of property lines, topographic mapping, and boundary and legal description plats. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2233 - Structural Drafting

Technical Hours: 3
ENT 2233 - Structural Drafting. This course is designed to teach students structural section, terms, and conventional abbreviations and symbols used by structural fabricators and erectors are studied. Knowledge is gained in the use of the A.I.S.C. Handbook. Problems are studied that involve structural designing and drawing of beams, columns, connections, trusses, and bracing (steel, concrete, and wood). Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2243 - Cost Estimating

Technical Hours: 3
ENT 2243 - Cost Estimating. This course is designed to give the student preparation of material and labor quantity surveys from actual working drawings and specifications. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2253 - Statics & Strengths of Material

Technical Hours: 3
ENT 2253 – Statics & Strengths of Material (Prerequisite: DDT 1313 or ENT 1313 or Consent of Instructor). Study of forces acting on bodies, movement of forces, stress of materials, basic machine design; beams, columns, and connections. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2263 - Quality Assurance

Technical Hours: 3
ENT 2263 - Quality Assurance. This course focuses on the application of statistics and probability theory in quality assurance programs. Various product-sampling plans as well as the development of product charts for defective units will be studied. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2273 - Facilities Planning

Technical Hours: 3
ENT 2273 - Facilities Planning (Co-Prerequisite: ENT 1823). This course deals with the techniques and procedures for developing an efficient facility layout and introduces some of the state-of-the-art tools involved, such as 3-D design and computer simulation. Two hours lecture. Two hours laboratory. Three hours credit

ENT 2323 - Industrial Welding & Metals

Technical Hours: 3
ENT 2323 - Industrial Welding & Metals. This course is designed to give the student instruction in different metals and their properties using basic SMAW welding and oxy-fuel cutting and brazing. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2343 - Advanced CAD

Technical Hours: 3
ENT 2343 – Advanced CAD (Prerequisite: ENT 1313). This course is designed to give the student a continuation of CAD. Emphasis is placed on the user coordinate system and 3D modeling. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2353 - B.I.M./Parametric Modeling

Technical Hours: 3
ENT 2353 - B.I.M./Parametric Modeling. This course is designed to give the student a continuation of CAD. Emphasis is placed on the managing Building Information Model. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2363 - Computer Numerical Control

Technical Hours: 3
ENT 2363 - Computer Numerical Control (Prerequisite: ENT 1313). A course designed to introduce the students to the basics of computer numerical control machines. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2413 - History & Appreciation of Artcrafts

Technical Hours: 3
ENT 2413 - History and Appreciation of Artcrafts. Growth and development of the artcrafts through the ages, instructional applications; practical designs; demonstrations and projects in leather, ceramics, woodworking and other handicraft areas. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2423 - Mapping & Topography

Technical Hours: 3
ENT 2423 - Mapping & Topography (Prerequisite: ENT 1413). Selected drafting techniques are applied to the problem of making maps, traverses, plot plans, plan and profile drawing using maps, field survey data, aerial photographs and related references, materials including symbols, notations, and other applicable standardized materials. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2443 - Principles of Manufacturing Management

Technical Hours: 3
ENT 2443 – Principles of Manufacturing Management. This course will include a study of manufacturing processes and materials. A problem solving approach will be used, emphasizing the context of the manufacturing business and the complexities to be addressed. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2453 - Energy Systems

Technical Hours: 3
ENT 2453 - Energy Systems. This course covers an overview of the past, present, and future of energy systems and the technologies they employ. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2463 - Grading & Drainage

Technical Hours: 3
ENT 2463 - Grading & Drainage (Co-Prerequisite ENT 2153). This course is designed to give the student computer aided design drafting for civil engineering, surveying and land development technicians. Industry standing civil engineering software program will be utilized in this course. Creation of grading and drainage plans, digital terrain models, underground utilities and engineering details. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2513 - Visual Communications in Design

Technical Hours: 3
ENT 2513 - Visual Communications in Design (Co-requisite: ENT 1113). This course is designed as an introduction to visual communications in interior design with emphasis on orthographic and free-hand drawing and visual design terminology. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2523 - Intermediate Design

Technical Hours: 3
ENT 2523 - Intermediate Design (Prerequisite ENT 1513). This course is a studio course for the exploration and application of design methodology to interior environments. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2533 - Design Materials & Installation Methods

Technical Hours: 3
ENT 2533 - Design Materials and Installation Methods. This course is a study of architectural materials for interiors with an emphasis on selection, cost, installation, construction supervision and code/standards requirements. Three hours lecture. Three hours credit.

ENT 2543 - Visual Literacy in Design

Technical Hours: 3
ENT 2543 - Visual Literacy in Design. This course is an exploration of various communication methods in interior design through a variety of projects. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2563 - Advanced Visual Literacy in Design

Technical Hours: 3
ENT 2563 - Advanced Visual Literacy in Design (Prerequisite ENT 2543). This course is an exploration of advanced graphic communication and modeling methods in interior design through a variety of projects. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2572 - Portfolio Development

Technical Hours: 2
ENT 2572 - Portfolio Development. This course is an introduction to various portfolio techniques, documentation methods and career planning for the interior design profession. Two hours lecture. Two hours credit.

ENT 2613 - Programmable Logic Controllers

Technical Hours: 3
ENT 2613 - Programmable Logic Controllers (Pre/Co-requisite: ENT 1113). This course covers the use of programmable logic controllers (PLCs) in a modern industrial setting, as well as the operating principles of PLCs. Discussion and practice in the programming, installation, and maintenance of PLCs. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2623 - Architectural Design II

Technical Hours: 3
ENT 2623 - Architectural Design II (Co-Prerequisite: ENT 1613). This course is designed to emphasize standard procedures and working drawings. Details involving architectural, mechanical, electrical, and structural drawings are covered, along with presentation of drawings and computer aided design assignments. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2643 - Architectural Rendering

Technical Hours: 3
ENT 2643 - Architectural Rendering (Prerequisite: ENT 1113). This course is designed to give the student visual expression of architectural principles and structures. This course will include perspective, shade, shadow, and color using pencil, pen & ink, paint and new media. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2713 - Architectural History

Technical Hours: 3
ENT 2713 - Architectural History. This course is designed to give the student analysis of achievements in the design and construction of major architectural developments from early times to present. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2723 - Digital Studio

Technical Hours: 3
ENT 2723 - Digital Studio (Prerequisite: ENT 1113). This course is designed to give the student a general overview of cur- rent issues in digital media; a study of how digital media can assist in the work environment; provides a basis for further study in graphic design and production. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2733 - Fluid Power

Technical Hours: 3
ENT 2733 – Fluid Power. Instruction in the basic principles of hydraulics and pneumatics and the inspection, maintenance and repair of hydraulic and pneumatic systems. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2833 - Preventive Maintenance

Technical Hours: 3
ENT 2833 – Preventive Maintenance. This course includes instruction in basic maintenance and troubleshooting techniques; use of technical manuals and test equipment; and inspection, evaluation, service, and repair of equipment. Two hours lecture. Two hours laboratory. Three hours credit.

ENT 2911 - Special Project

Technical Hours: 1
ENT 2911 - Special Project (Prerequisite: Consent of Instructor). This course is designed to give the student practical application of skills and knowledge gained in other drafting courses. The instructor works closely with the student to ensure that the selection of a project will enhance the student's learning experience. Two hours laboratory. One hour credit.

ENT 2912 - Special Project

Technical Hours: 2
ENT 2912 - Special Project (Prerequisite: Consent of Instructor). This course is designed to give the student practical application of skills and knowledge gained in other drafting courses. The instructor works closely with the student to ensure that the selection of a project will enhance the student's learning experience. Four hours laboratory. Two hours credit.

ENT 2913 - Special Project

Technical Hours: 3
ENT 2913 - Special Project (Prerequisite: Consent of Instructor). This course is designed to give the student practical application of skills and knowledge gained in other drafting courses. The instructor works closely with the student to ensure that the selection of a project will enhance the student's learning experience. Six hours laboratory. Three hours credit.

ENT 2923 - Fundamentals of Multimedia

Technical Hours: 3
ENT 2923 - Fundamentals of Multimedia (Prerequisite: ENT 1613). A general overview of current issues in multimedia. Study of how multimedia can assist in the work environment; provides a basis for further study in multimedia design and production. Two hours lecture. Two hours laboratory. Three hours credit.

FOT 1114 - Forest Measurements I

Technical Hours: 4
FOT 1114 - Forest Measurements I. A classroom and field study of the basic principles and skills required for timber measurements. Direct and indirect systems of measurement and volume computation, forest type mapping, and graphic reporting are studied and practiced including an examination of current techniques of forest and timber inventory, stratification of volume tables and their use. Required are formal cruise reports, preparation of a cruise map, and the application of basic statistical knowledge to timber measurements. Two hours lecture. Four hours laboratory. Four hours credit.

FOT 1124 - Forest Measurements II

Technical Hours: 4
FOT 1124 - Forest Measurements II. A continuation of Forest Mensuration I with emphasis on electronic and computer applications in forest measurements. Two hours lecture. Four hours laboratory. Four hours credit.

FOT 1314 - Forest Protection

Technical Hours: 4
FOT 1314 - Forest Protection. A comprehensive course designed to give the student knowledge in identifying forest insects, diseases, and methods and techniques in controlling these. Also covers preventing and controlling forest fire. Two hours lecture. Four hours laboratory. Four hours credit.

FOT 1414 - Forest Products Utilization

Technical Hours: 4
FOT 1414 - Forest Products Utilization. The emphasis of this course includes primary and secondary products derived from wood and how they are manufactured and used in today's society. One hour lecture. Four hours laboratory. Four hours credit.

FOT 1714 - Applied Dendrology

Technical Hours: 4
FOT 1714 - Applied Dendrology. An elementary study of trees; the habitats and principle botanical features, forms, functions, and ecological relationships. The major commercially important forest trees of the region are examined in class and through extensive field and laboratory studies. Scientific classification of plants and identification of local flora are emphasized. Two hours lecture. Four hours laboratory. Four hours credit.

FOT 1813 - Introduction to Forestry

Technical Hours: 3
FOT 1813 - Introduction to Forestry. This course is designed to acquaint the student with the role of a forest technician. Emphasis is placed on educational and job requirements, duties, career and salaries. The student is also made aware of how forestry fits into the state, national and international scene. Three hours lecture. Three hours credit.

FOT 2124 - Forest Surveying

Technical Hours: 4
FOT 2124 - Forest Surveying. A course to provide land surveying skills required in the forest industry. Includes instruction in interpreting legal descriptions, deeds, maps, and aerial photographs, and demonstration of equipment use and surveying practices. Two hours lecture. Four hours laboratory. Four hours credit.

FOT 2214 - Applications of GIS/GPS in Forestry

Technical Hours: 4
FOT 2214 - Applications of GIS/GPS in Forestry. This course includes using remote sensing, interpretation, and application of aerial photos and other remote sensing images in forestry. This course also included the global positioning system and other remote sensing devices used in forestry. Two hours lecture. Four hours laboratory. Four hours credit.